 |
 |
 |
 |
 |
 |
"CS" Lock Nuts
１．"M"
means metric thread and gigits are major diameter of thread and pitch.
(M代表公制式螺紋；數字代表螺紋外徑及螺距。)
(M代表公制式螺紋；數字代表螺紋外徑及螺距。)
２．NO.ANL24-ANL40
aiso available for 304stainless steel.
NO.ANL24-ANL40亦有生產白鐵材質 SUS304
NO.ANL24-ANL40亦有生產白鐵材質 SUS304
| Lock
Nuts No. |
Series AN L | |
| Lock washer No. | Thread (mm) | |
ANL24 |
AWL24 | M120x2.0 |
ANL26 |
AWL26 | M130x2.0 |
ANL28 |
AWL28 | M140x2.0 |
ANL30 |
AWL30 | M150x2.0 |
ANL32 |
AWL32 | M160x3.0 |
ANL34 |
AWL34 | M170x3.0 |
ANL36 |
AWL36 | M180x3.0 |
ANL38 |
AWL38 | M190x3.0 |
ANL40 |
AWL40 | M200x3.0 |
| Lock Nuts No. | mm | Tapped Hole | Suitable Lock Plate No. |
| Threads(mm) | |||
| ANL44 | Tr220x4 | M6x1 | ALL44 |
| 48 | Tr240x4 | M8x1.25 | ALL48 |
| 52 | Tr260x4 | M8x1.25 | ALL52 |
| ANL56 | Tr280x4 | M8x1.25 | ALL56 |
| 60 | Tr300x4 | M8x1.25 | ALL60 |
| 64 | Tr320x5 | M8x1.25 | ALL64 |
| ANL68 | Tr340x5 | M8x1.25 | ALL68 |
| 72 | Tr360x5 | M8x1.25 | ALL72 |
| 76 | Tr380x5 | M10x1.5 | ALL76 |
| ANL80 | Tr400x5 | M10x1.5 | ALL80 |
| 84 | Tr420x5 | M10x1.5 | ALL84 |
| 88 | Tr440x5 | M12x1.75 | ALL88 |
| ANL92 | Tr460x5 | M12x1.75 | ALL92 |
| 96 | Tr480x5 | M12x1.75 | ALL96 |
| 100 | Tr500x5 | M12x1.75 | ALL100 |
|
|||
