[ 01 ] [ 02 ] [ 03 ]
 
TABLE 4.1-PART2
LOCK NUTS DIMENSIONS
Inch Design
SERIES N-00 and TN-00
SNP, SNW 01
Part2
N-00 thru AN-40  
Dimensions in inches TN-065 thru Ton-140
  
美規軸承螺帽型號 牙 外徑 表面直徑 螺帽寬度 溝寬 深度
Major Dia.
d
nom.		 No. per inch
K		 C
max		 E
max.		 N-00 TN-00 G min. H max.
N-00 0.391 32 0.755 0.625 0.229 - 0.120 0.073
N-01 0.469 32 0.880 0.719 0.323 - 0.120 0.073
N-02 0.586 32 1.005 0.813 0.323 - 0.120 0.104
N-03 0.664 32 1.130 0.938 0.354 - 0.120 0.104
N-04 0.781 32 1.380 1.125 0.385 - 0.178 0.104
N-05 0.969 32 1.568 1.281 0.416 - 0.178 0.104
N-06 1.173 18 1.755 1.500 0.416 - 0.178 0.104
N-07 1.376 18 2.068 1.813 0.448 0.448 0.178 0.104
N-08 1.563 18 2.255 2.000 0.448 0.448 0.240 0.104
N-09 1.767 18 2.536 2.281 0.448 0.448 0.240 0.104
N-10 1.967 18 2.693 2.438 0.510 0.510 0.240 0.104
N-11 2.157 18 2.974 2.656 0.510 0.510 0.240 0.135
N-12 2.360 18 3.161 2.844 0.541 0.541 0.240 0.135
N-13 2.548 18 3.380 3.063 0.573 0.573 0.240 0.135
N-14 2.751 18 3.630 3.313 0.573 0.573 0.240 0.135
AN-15 2.933 12 3.880 3.563 0.604 0.604 0.360 0.135
AN-16 3.137 12 4.161 3.844 0.604 0.604 0.360 0.135
AN-17 3.340 12 4.411 4.031 0.635 0.635 0.360 0.166
AN-18 3.527 12 4.661 4.281 0.698 0.698 0.360 0.166
AN-19 3.730 12 4.943 4.563 0.729 0.729 0.360 0.166
AN-20 3.918 12 5.193 4.813 0.760 0.760 0.360 0.166
AN-21 4.122 12 5.443 5.000 0.760 0.760 0.485 0.198
AN-22 4.325 12 5.724 5.281 0.791 0.791 0.485 0.198
AN-24 4.716 12 6.130 5.688 0.823 0.823 0.485 0.198
AN-26 5.106 12 6.755 6.188 0.885 0.885 0.610 0.260
AN-28 5.497 12 7.099 6.531 0.948 1.198 0.610 0.260
AN-30 5.888 12 7.693 7.063 0.979 1.260 0.610 0.291
AN-32 6.284 8 8.068 7.438 1.041 1.291 0.610 0.291
AN-34 6.659 8 8.661 8.031 1.073 1.354 0.610 0.291
AN-36 7.066 8 9.068 8.375 1.104 1.416 0.735 0.323
AN-38 7.472 8 9.474 8.781 1.135 1.416 0.735 0.323
N-40 7.847 8 9.849 9.156 1.198 1.510 0.735 0.323
N-44 8.628 8 11.005 9.843 1.260 - 0.980 0.510
For tolarances see Table 9.1,Part2.
 
[ 01 ] [ 02 ] [ 03 ]
版權所有 進興精工股份有限公司 哇客滿生活消費網